- Previous 0/1630
Porcelain jar in the form of a spittoon (zhadou). Decorated all over with enamels on the biscuit. Outside incised with five-clawed dragons and flaming pearls among ruyi clouds, in copper green against a yellow enamel ground. Colourless glaze inside. Base glazed, with mark.
- Made in: Jingdezhen
- (Asia,China,Jiangxi (province),Jingdezhen)
- Height: 109 millimetres
Inscription CommentFour-character Zhengde mark in a double circle in underglaze blue on the base
Published PDF date : Ming Zhengde 1506-1521Room 95 label text:
Zhadou with dragons
Zhadou (jar with bulbous body and flared rim) were used as spittoons, or vessels for leys or slops. This zhadou is incised with five-clawed dragons, shown in profile with clenched jaws, chasing flaming pearls and each other amid auspicious ruyi clouds. Potters inscribed a four (as opposed to the usual six) character Zhengde reign mark in underglaze blue on the base and covered the inside and base with a transparent glaze, then, before a second lower temperature firing they picked out the dragon and cloud design in green glaze on a ground of yellow. Potters working at Jingdezhen a century earlier, in the Yongle (AD 1403–24) reign invented this green and yellow colour scheme and design.
Porcelain, incised and with underglaze cobalt-blue mark and green and yellow glazes
Jingdezhen, Jiangxi province江西省, 景德鎮
Ming dynasty, Zhengde mark and period, AD 1506–21
23 March 2009
Clean, remove overpaint, re-do fill or retouch old fill.
Old restorations to rim on pot. Excess overpaint has yellowed and cracked and been applied by an airbrush, and is covering original surface. It is difficult to see what area has been filled underneath the overpaint. Light surface dirt. Enamelled decoration is very slightly scratched. Some chipping to the enamelled decoration.
Removed all overpaint with Industrial methylated spirits (ethanol,methanol) on cotton wool swabs. Old plaster gap fill under old overpaint, removed with a scalpel after softening with de-ionised water. Steam cleaned the chip twice with de-ionised water to remove ingrained dirt, dried with paper towels. Allowed to dry fully for one week under a cover to prevent dirt and dust contaminating the clean chips. Gap filled with Fynebond epoxy resin which was bulked heavily with Aerosil 805 fumed silica and coloured with artists' dry ground pigments. Resin was applied with a metal spatula, allowed to cure fully for 2 days, then softened with Acetone (propan-1-one/dimethyl ketone) on a cotton wool swabs and shaved back to the correct size. Resin was allowed to cure for a further 2 days before being polished with Micromesh fine abrasive cloth (silicon carbide/aluminium oxide) grades 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000. Object was further cleaned with a 50:50 solution of de-ionised water and Industrial methylated spirits (ethanol, methanol) applied on a cotton wool swab and dried with a paper towel.
If you’ve noticed a mistake or have any further information about this object, please email: firstname.lastname@example.org
Object reference number: RRC39644
British Museum collection data is also available in the W3C open data standard, RDF, allowing it to join and relate to a growing body of linked data published by organisations around the world.
The Museum makes its collection database available to be used by scholars around the world. Donations will help support curatorial, documentation and digitisation projects.