- Previous 0/2733
Two pieces of limestone relief; geometric design; slightly convex face.
- Excavated/Findspot: Wadi Sarga
- (Africa,Egypt,Middle Egypt,Asyut,Wadi Sarga)
- Length: 63 centimetres (larger)
- Length: 18 centimetres (smaller)
fair - broken in two - 2 (25)
5 November 2013
Potentially reattach two parts. Light clean, improve and secure old fill/break edges. There are pigment remains, red/orange/ green pigments.
The object is at present broken into two sections. The proper right section (1/5 of the total length of object) is the smaller of the two and is significantley lighter in weight. Therefore when it is reattached (agreed by curator) there will be no need to drill dowel holes in each break edge in order to dowel the object.
The two sections of the object were reattached using HMG Paraloid B72 (methyl ethyl methacrlylate) and supported on the underside with selcon (breeze block) fragments, then an applied base pad of Polyfilla interior (calcium sulphate hydrate,cellulose ether) was placed and carved back when dried which provides the extra structual. The fill was retouch painted using acrylic paints.The surface of the stone was cleaned using Wishab sponge (vulcanized latex,filler) to remove any loose particles of dirt. The areas of previous plaster surface fills had weakened over time and looked unsightly. The old fills were removed mechanically and replaced using Polyfilla interior filler. The areas were retouched using acrylic paints.
Excavated 1913-1914 by Reginald Campbell Thompson on behalf of the Byzantine Research Fund.
Ancient Egypt & Sudan
If you’ve noticed a mistake or have any further information about this object, please email: firstname.lastname@example.org
Object reference number: YCA55768
British Museum collection data is also available in the W3C open data standard, RDF, allowing it to join and relate to a growing body of linked data published by organisations around the world.
The Museum makes its collection database available to be used by scholars around the world. Donations will help support curatorial, documentation and digitisation projects.